Using An External Drive; Overview; How To Attach A Usb Drive - Cisco Linksys EA2700 User Manual

Linksys EA-Series

Using an External Drive

For
EA3500 EA4500 EA6500

Overview

You can attach most USB drives (including a thumb drive or a high-capacity
external drive) to the USB port on your router. You can then use the drive as
networked storage, as a media server (for media-enabled devices such as a
networked TV), and as an FTP (File Transfer Protocol) server. You can also specify
which users can access the content on the drive. (The media server feature is
not available on the EA3500.) EA4500 menus shown. Menus are subject to
change.
To view the status and settings of your attached drive:
1. Log into Linksys Smart Wi-Fi. (See "How to configure your router" on page
14.
2. Click USB Storage under Apps. The Status tab displays information such
as:
Drive capacity and use
•
Secured folder access status
•
Addresses for accessing shared folders, the FTP server, and media
•
server

How to attach a USB drive

For
EA3500 EA4500 EA6500
If a USB drive is already connected to the router, and you want to attach a
different drive to that USB port, you should safely disconnect the old drive first.
To safely remove a USB drive from the router:
1. Log into Linksys Smart Wi-Fi, then click USB Storage under Apps.
2. In the Status tab, click Safely remove drive.
3. Disconnect the old drive from the router.
To attach a USB drive to the router:
1. Connect the USB drive to an available USB port on the back of your
router. Your router detects the drive.
2. To update the USB Storage screen, you may need to click Refresh.
25 25