Table of Contents
Advertisement
4
Load the ink ribbon.
1 Align the two pegs on each side of the ink ribbon
with the slots on the ribbon tray.
Notes
• Make sure to load the ink ribbon with the front and
back oriented correctly.
Right
• Do not manually wind the ink ribbon before loading
it. Doing so may adversely affect the print quality.
2 Slide the ink ribbon straight into the ribbon tray
until completely inserted.
Note
Do not touch the white tabs on the sides of the ribbon
tray. Doing so may result in improper loading of the
ink ribbon.
5
6
Removing the Ribbon Tray
Wrong
To remove the ribbon tray when replacing the ink ribbon,
for example, pull the tray straight out.
If the ink ribbon tears during use
Cellophane tape, etc., can be used to repair a torn ink
ribbon so that the remainder of the ribbon can be used.
Wind the ink ribbon until the cellophane tape is no longer
visible by turning the gray gear at the winding end in the
direction of the arrow. (Make sure the ink ribbon does not
sag.)
Tab
Slide the ribbon tray straight into the printer until
completely inserted.
Close the ribbon door panel.
Cellophane tape
13
Before Printing
Hide quick links:
Advertisement
Table of Contents
