Table of Contents
Advertisement
1. Main Power On/Off: Press this switch for main power. The indicator light will turn on.
2. ON/OFF: Press this button for turning on the insert PCB board power.
3. FLAME: Press this button to turn on the flame/log. Press this button again to turn off the flame.
Keep pressing down this button, the flame/log light will turn from bright to dim. Release the
button when the desired brightness is reached.
4. 750W: Press this button to turn on the heater at 750W heating power.
5. 1500W: Press this button to turn on the heater at 1500W heating power. Meanwhile the 750W
should be turned on first.
6. Temperature Control: The temperature dial on the left side is for temperature control, which
could automatically turn the heater on and off to maintain a comfort temperature. Turn the
thermostat dial to the right to increase the desired temperature and the left to lower it. Once the
room temperature reaches the desired temperature, turn the thermostat dial counter-clockwise
until you hear a click. Leave in this position to maintain the room temperature at its current
setting.
Note: When the Main Power On/Off switch is turned OFF, all other heater functions will stop even
though the other switches may be in the ON position.
INSTRUCTIONS FOR REMOTE OPERATION
Plug in your electric fireplace, and turn on the Main Power On/Off switch on the right side of the
front panel. It will beep once. This means you have power and your remote is ready to operate your
electric fireplace.
1. ON/OFF: Press this button to turn on the power.
2. FLAME: Press this button to turn on the flame effect. Keep pressing down this button, the
flame/log light will turn from bright to dim. Pressing this button again will turn off the flame.
3. 750W Button: Press this button and the fireplace will work at 750W. Pressing again will switch it
off.
4. 1500W Button: Press this button and the fireplace will work at 1500W. Pressing again will switch
it off.
-10 -
Advertisement
Table of Contents
