Page 1
CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER’S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual...
n When operating a power tool outdoors, use an GENERAL SAFETY RULES extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of WARNING electric shock. Read all safety warnings and all instructions. n If operating a power tool in a damp location is Failure to follow the warnings and instructions may unavoidable, use a residual current device (RCD)
GENERAL SAFETY RULES SERVICE n Have your power tool serviced by a qualified repair n Do not use the power tool if the switch does not turn person using only identical replacement parts. it on and off. Any power tool that can not be controlled This will ensure that the safety of the power tool with the switch is dangerous and must be repaired.
SPECIFICATIONS APPLICATIONS You may use this product for the purposes listed below: Motor 4 V DC Driving screws with screwdriver bits Switch Single Speed/Reversible Light-duty drilling No load Speed 180 r/min.(RPM) Clutch 12 Positions Torque 5 Nm max TO CHARGE Collet 6.35 mm See Figure 2.
OPERATION MAINTENANCE WARNING: DIRECTION OF ROTATION SELECTOR When servicing, use only identical replacement (FORWARD/REVERSE/CENTER LOCK) parts. Use of any other parts may create a hazard See Figure 4. or cause product damage. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger.