Electrical Data - LG LW1004ER, LW1204ER, LW1404ER, LW1804ER Owner's Manual

10
Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
(See Fig. 21)
11
Lift the inlet grille and secure it with a screw (Type A)
through the front grille.(See Fig. 21)
12
Window installation of room air conditioner is now
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.

Electrical Data

Line Cord Plug
Do not under any
circumstances cut
or remove the
grounding prong
from the plug.
Power supply cord with
3-prong grounding plug
Use of extension cords
• Because of potential safety hazards, we strongly discourage the use of an extension cord. However, if you wish
to use an extension cord, use a CSA certified/UL-listed 3-wire (grounding) extension cord, rated at 15A, 125V.
Electrical Data (LW1804ER MODEL)
Line Cord Plug
All wirring should be made in accordance with local electrical codes and regulations.
: Aluminum house wiring may pose special problems.
NOTICE
Consult a qualified electrician.
Use Wall Receptacle
Standard 125V, 3-wire grounding
receptacle rated 15A, 125V AC
Use Wall Receptacle
230V/208V
tandem type
24
WE R
PO
P
DE TEM
MO
FAN D
E SP EE
TIM
Fig. 21
Power Supply
Use 15 AMP, time
delay fuse or circuit
breaker.
Power Supply
Use 15 AMP circuit.
Refer to nameplate for
correct fusing.