Download Print this page

Important Safety Instructions; Instrucciones De Seguridad - Behringer V-AMP 3 Operating/Safety Instructions Manual

Behringer v-amp 3 virtual amplification, guitar amplifier
Hide thumbs Also See for V-AMP 3:

Advertisement

V-AMP 3 • pg 2
EN
Important Safety
EN
Instructions
ES
This symbol, wherever it appears, alerts
you to the presence of uninsulated
dangerous voltage inside the enclosure
— voltage that may be sufficient to constitute a risk
of shock.
This symbol, wherever it appears, alerts
you to important operating and
maintenance instructions in the
accompanying literature. Please read the manual.
FR
Caution
To reduce the risk of electric shock, do not
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualified personnel.
Caution
To reduce the risk of fire or electric shock,
do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use by
qualified service personnel only. To reduce
the risk of electric shock do not perform any servicing
other than that contained in the operation instructions.
Repairs have to be performed by qualified service
personnel.
Read these instructions.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10.
Place the power cord so that it is protected from being
walked on and sharp edges. Be sure that the power cord is
protected particularly at plugs, convenience receptacles
and the point where it exits from the apparatus.
www.behringer.com
11.
Use only attachments/accessories specified by the
manufacturer.
12.
Use only with the
cart, stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15.
The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16.
Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall remain
I
readily operable.
Instrucciones de
ES
seguridad
Este símbolo, allí donde aparezca, le
advierte de la presencia de un voltaje
peligroso sin aislamiento dentro de la
carcasa; este voltaje puede ser suficiente para constituir
un riesgo de descarga.
Este símbolo, allí donde aparezca, le
advierte de la existencia de instrucciones
operativas y de mantenimiento incluidas
en la documentación adjunta. Por favor, lea el manual.
Atención
Para reducir el riesgo de descarga
eléctrica, no quite la tapa (o la parte
posterior). Dentro de este aparato no hay
piezas susceptibles de ser reparadas por el usuario. Dirija
cualquier posible avería al servicio técnico oficial.
Atención
Para reducir el riesgo de incendio o
descarga eléctrica, no permita que este
aparato quede expuesto a la lluvia, humedad o cualquier
tipo de salpicaduras. No coloque sobre este aparato
ningún tipo de recipiente que contenga líquidos.
Atención
Estas instrucciones de mantenimiento
se incluyen para su uso únicamente
por técnicos cualificados. Para evitar el riesgo de una
descarga eléctrica, no realice reparaciones fuera de lo
descrito en el manual de operaciones. Las reparaciones
deben ser realizadas exclusivamente por personal
cualificado.
1.
Lea las instrucciones.
2.
Conserve estas instrucciones.
3.
Preste atención a todas las advertencias.
4.
Siga todas las instrucciones.
5.
No use este aparato cerca del agua.
6.
Limpie este aparato con un paño seco.
7.
No bloquee las aberturas de ventilación. Instale
el equipo de acuerdo con las instrucciones del fabricante.
8.
No instale este equipo cerca de fuentes de calor
tales como radiadores, calderas, estufas u otros aparatos
(incluyendo amplificadores) que puedan producir calor.
9.
No elimine o anule nunca la conexión a tierra del
aparato o del cable de corriente. Un enchufe polarizado
tiene dos bornes, uno más ancho que el otro. Un enchufe
con toma de tierra dispone de tres contactos: dos polos
y la toma de tierra. El borne ancho y el tercer contacto se
incluyen para su seguridad. Si el enchufe incluido con el
equipo no encaja en su salida de corriente, haga que un
electricista sustituya esa salida obsoleta.
10.
Coloque el cable de corriente de manera que no
pueda ser pisado y que quede separado de objetos afilados.
Asegúrese de que el cable de corriente esté protegido,
especialmente en la zona de la clavija y en el punto
donde sale del aparato.
11.
Use únicamente los dispositivos o accesorios
especificados por el fabricante.
12.
Use únicamente
el bastidor, plataforma,
trípode, soporte o mesa
especificados por el
fabricante o suministrados
junto con el equipo. Cuando
utilice un bastidor con
ruedas con este equipo,
tenga cuidado para evitar posibles daños en caso de un
vuelco.

Advertisement

loading