Table of Contents
Advertisement
Additional features
Sleep Mode
1. Press the Sleep Mode Auto button to set the time
you want the unit to turn off automatically.
2. The Timer is programmed in one-hour increments
by pressing the Sleep Mode Auto button 1 to 7
times.
The sleep mode is available for 1 to 7 times.
To alter the time period in steps of 1 hour, press
the Sleep Mode Button while aiming at air
conditioner.
3. Make sure the Sleep Mode Auto LED lights up.
Setting the Time
1. Time can be set only when you have pressed the
Reset button. If you have just replaced the batteries,
the Reset button should be pressed to reset the
time.
Press the Start/Stop button.
Delay Start/Pre-Set Stop
1. Make sure the time is set correctly on the Remote
Controller display.
2. Press the ON/OFF Timer
buttons to turn Timer on or off.
3. Press the Time Setting
buttons until the desired
time is set.
NOTICE
Select one of the following four types of operation.
Delay OFF Timer
2. Press the Time Setting buttons until the desired time
3. Press the Timer SET button.
NOTICE
4. Press the selected on/off setting by
ON
OFF
To cancel the setting the timer.
Delay ON Timer
Delay OFF and ON Timer
To cancel the Sleep Mode, press the sleep
Mode Auto button several times until the star
(
) disappears from the operation display.
NOTICE
The Sleep Mode will be operated at
low fan speed (cooling) or medium fan speed
(heat pump only) for quiet sleeping.
IN COOLING MODE: The temperature will
automatically rise by 1°C (2°F) over the next 30
minutes and by 2°C (4°F) in 1 hour for
comfortable sleeping.
is set.
Check the indicator for A.M. and P.M.
pressing the Timer SET button while
aiming the Remote Controller at the
signal receptor.
Press the Timer Cancel button while aiming
CANCEL
Remote Controller at the signal receptor.
(The timer lamp on the air conditioner and the
display will go out.)
with the unit running
Owner's Manual 19
Additional features
CANCEL
SET
SET
Delay ON and OFF Timer
Hide quick links:
Advertisement
Table of Contents
