Installing The Tablet In A Vehicle - Audiovox T852SBK Quick Start Manual

Installing the Tablet in a Vehicle

To install the tablet:
1� From the back seat of the vehicle,
lift the headrest upwards so that it
is locked into the highest position�
2� Locate the vehicle power adapter
and plug it into the headrest
mounting bracket power IN
connection, then connect the
other end to the vehicle ACC
socket�
Note: The vehicle ACC socket
should have power when the
vehicle is running and no power
when the vehicle is off.
3� Remove the bracket locking
support bar from the headrest
mounting bracket body by
removing the two locking screws�
4� Place the headrest mounting
bracket body on the rear side of
the headrest support posts�
5� Align the screw holes on the
bracket locking support bar with
the screw holes on the headrest
mounting bracket body and
loosely install the two locking
screws�
6� Adjust the headrest to the
desired position and tighten the
two locking screws securing the
headrest mounting bracket to the
headrest�
4
Headrest Mounting
Bracket
(Bottom Side View)