4. Camera
4.1
Connecting the Camera to Power
• Insert the small end of the Power Adapter into the rear of the Camera and
plug the Power Adapter into a suitable electrical outlet and switch ON.
• Slide the ON/OFF switch to ON, the green Power LED will light up. (Note: To
switch the device off, slide the ON/OFF switch to OFF.)
4.2
Camera Functions:
Working with Android™ devices
• Run the Hubble for Motorola Monitors application on your Android™ device.
• The Camera view appears on the screen.
4.2.1
Add more cameras
• Whilst on the Camera view, tap on the Hubble logo to go to the Camera tab
page. (Picture A13)
• Tap on Add Camera to add more cameras by following the steps for
Android™ device setup in section 3.2.4. (Picture A14)
Camera
21