Table of Contents
Advertisement
Operating Instructions
®
Busch-Wächter
4.1
Brightness switching threshold
OFF
Deletes the brightness switching threshold stored via the remote control
and activates the setting of the brightness potentiometer on the device.
LUX Memo
Info / symbol of the "Brightness switching threshold" setting option.
ON
Stores the current brightness value as brightness threshold value on the
device.
4.2
Presence simulation
OFF
Deactivates presence simulation.
There is a reset to the operating mode that was active prior to the
activation.
Person / house
Symbol of the "Presence simulation" setting option.
ON
Activation of the presence simulation.
- Activation of light during twilight
– Switchover to automatic mode at approximately 22:30 p.m.
When presence simulation is activated, this gives the impression that persons are present in the house and is
therefore ideal for when you are away on holiday.
4.3
Continuous light
Continuous OFF / lamp is crossed out
The movement detector is activated for four hours. It then automatically
returns to the prior operating mode.
AUTO
Early pressing of the "AUTO" button reverts back to the previous
operating mode, the one that was active prior to pressing the continuous
light ON button.
Continuous light ON / lamp is on
The movement detector is activated for four hours. It is also active when
no one is within the detection range, but light is still required.
It then automatically returns to the prior operating mode.
Pos: 20 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 12 @ 1
Operating Instructions | 1473-1-8140
Operation
— 7 —
Advertisement
Table of Contents
