Table of Contents
Advertisement
22
Set up the printer and paper handling options
2
Place the high-capacity feeder on
the floor or adequate work
surface.
3
Remove the four screws securing
one of the casters to the high-
capacity feeder.
4
Add or remove spacers.
To add spacers:
a
Insert the four screws through
the caster.
b
Place the spacers on the
screws.
c
Align and insert the screws
into the screw holes on the
high-capacity feeder.
To remove the factory installed
spacer:
a
Remove the spacer from the
top of the caster.
b
Insert the four screws through
the caster.
c
Align and insert the screws
into the screw holes on the
high-capacity feeder.
5
Tighten the four screws to secure
the caster to the high-capacity
feeder.
6
Repeat steps 3 through 5 to add
or remove spacers on the
remaining three casters.
7
Return to step 5 on page 19.
Advertisement
Table of Contents
