Using The Setup Wizard - D-Link DFL-210 Quick Installation Manual

4.2 Using the Setup Wizard

The DFL-210 provides Web based configuration. You can configure your DFL-
210 through Internet Explorer 6 and later or Firefox 1.0 and later browser in MS
Windows, Macintosh or UNIX based platforms.
Activate your browser, and ensure your built-in Pop-Up Blocker has been
disabled, so that the Pop-Up Blocker will not block the Startup Wizard while you
initiate the NetDefend Firewall for the first time.
Additionally, in order to reduce the impact of Pop-Up Blocker, a user-friendly
mechanism has beem implemented in NetDefend Firewalls. A "Startup Wizard"
button is shown on the toolbar since firmware v2.20. This button is available on
the WebGUI while the appliance is initiated with Configuration Version 1. Once
you complete configuration and save/activate the setting, the Startup Wizard
button will be removed automatically from the toolbar while you login WebGUI
next time.
Now, let's start on WebGUI login, type the IP address of the DFL-210, e.g.
https://192.168.1.1, in the Location (for Netscape) or Address (for IE) field and
press "Enter".
Open your Web browser and
type
the URL address box. Then
press the Enter or Return key.
Note:
DFL-210 allows either HTTP or a secure HTTPS connection
from any management host. However, for security reason, by
default only a secure HTTPS connection is allowed.
Log on to the DFL-210 web interface.
To start using the DFL-210 web interface you need to log on using the
default username and password.
Type the default
Username/Password
Username: admin
Pasword: admin
and click Login
https://192.168.1.1 /
DFL-210 Quick Installation Guide
into
06