Kyocera DuraXA Quick Start Manual page 22

●
Do not expose your phone to water heated in excess of 104°F
(40°C).
●
Your phone is inoperable under water and should be dried as
quickly as possible when wet.
●
Do not use the charger/data port for charging, data
transmission, etc. until the phone is completely dry.
●
Do not use the audio jack to plug in an accessory until the
phone is completely dry.
If your phone gets wet:
Water in the phone's open microphone and speaker ports may
affect outbound audio quality and speaker performance. These
are temporary conditions and will subside once the phone is dry.
1. Wipe the phone surfaces with a dry clean cloth.
2. Water in the phone's open microphone and speaker ports
(small holes located at the top and bottom and grid of
holes along the bottom front of the phone) should be
removed with puffs of air directly into the ports. Phone
audio may not operate properly until ports are dry. Apply a
21 Important Safety Information
dry clean cloth to the open areas and crevices to remove
the moisture left on the phone: microphones; speakers; all
physical keys; battery cover; audio jack cover; and
charger/data port cover.
3. Repeat the process until the phone is completely dry.
Charging
●
Dry your phone with a clean cloth before charging.
●
Do not touch the charger, charging cable, or charger/data port
with wet hands. Doing so may cause electric shock, injury, or
product failure.
●
Do not charge your phone in a wet or damp place, such as in
a bathroom or near a kitchen sink.