Table of Contents
Advertisement
Chapter 6. Upgrading Software
Instructions for Upgrading Software Using HyperTerminal
Step
6
Change the Protocol to 1K Xmodem and click Send.
7
Once the download is complete, exit HyperTerminal,
saving the session if desired.
The software upgrade is now complete.
If the PWR/LINE, B1 and B2 LEDs are flashing, the software
upgrade failed. (In this case, see Troubleshooting on page 8-1.)
6-4
Action
Express 3100 User Manual
61200240L2-20
Advertisement
Table of Contents
