Osd Initial Language Settings - Optional; Initial Setting The Area Code; Adjust The Settings - LG HS33S User Manual

HS33S_A2P.BSGPLLK_ENG_2858

OSD Initial language settings - optional

Before using the unit for the first time, you have to adjust OSD initial
language.
1 Turn the power on:
The language list appears.
2 Select the language:
3 Press:
4 To confirm press:

Initial Setting the Area Code

The first time you use this unit, to set the Area Code you have to as below.
1 Display setup menu:
2 Select LOCK menu on the first level:
3 Move to second level:
The activated Area Code appears on the
second level.:
4 Move to third level:
5 Enter the new password:
6 Recheck entered new password:
7 Select a code for a geographic area:
After select, Rating and Password will be
activated.(page 18)
8 To confirm press:
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the Rating and Password.
8
Downloaded From TheatreSystem-Manual.com Manuals
3/4/09 2:05 PM Page 8
ON REMOTE
POWER
vV b B
ENTER
and ENTER
b B
ON REMOTE
SETUP
v V
B
B
numerical buttons
and ENTER
(0-9)
numerical buttons
(0-9) and ENTER
vV b B
ENTER

Adjust the settings

1 Display setup menu :
2 Select a desired option on the first level:
3 Move to second level:
4 Select a desired option on the second level:
5 Move to third level:
6 Change the setting:
Adjust the settings - more you can do
Adjust the language settings
OSD – Select a language for the Setup menu and on-screen display.
There is displayed as "-" or other error mark on display when you
change OSD, do as follows;
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Audio/Disc Subtitle/Disc Menu– Select a language for the
Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 18). If you make a mistake before pressing
ENTER, press CLEAR.
[Off] (for Disc Subtitle): Turn off Subtitle.
ON REMOTE
SETUP
v v V V
B B
v v V V
B B
v v V V , ENTER