Table of Contents
Advertisement
10. System connection
10-1 Connection to PC
About the micro USB port, you can use the included Micro USB cable to connect
your pad to a PC to sync photos, contacts, data, etc..
This requires MTP drivers and Windows 7 installed on your PC. These
are available on the Microsoft website.
11. Attachment
11-1 Troubleshooting
How do I stop the PAD when the system is not responding?
Hold down the power button for about eight seconds to force a power off.
How do I check the PAD if it does not turn on?
Connect the device to a power source if the battery power is low.
1.
Make sure that the charge indicator lights up and the adapter is functioning
2.
properly.
Remaove external devices.
3.
What to do if water has got into the PAD?
Turn the PAD NOT on.
1.
Do not press the power button, but disconnect the power cord, so as to eliminate
2.
the PAD. Remove all external devices and send to the PAD to the service center.
Transport the PAD NOT again in the dirty carrying case.
3.
How do I reset the device to factory settings?
Tap on: Settings---Back up & reset---Factory data reset, to reset the system to
factory settings.
How do I increase the battery time?
Adjust the brightness of the touch screen display menu at an adequate level.
1.
Turn down the volume.
2.
Reduce the menu idle time until the unit automatically switches to the idle state.
3.
What to do when the camera is out of focus?
Check that the lens is clean, and clean it if necessary with a soft cloth.
39
Advertisement
Table of Contents
