Rear Tail, Turn Signal, And Backup Lamps - Dodge Caliber 2011 Owner's Manual

6. Fold the front of the splash shield rearward far enough
to access the back of the front fascia.
7. From behind the front fascia disconnect the engine
compartment wire harness connector from the front fog
lamp bulb connector receptacle.
8. Firmly grasp the bulb by the two latch features and
squeeze them together to unlock the bulb from the back
of the front fog lamp housing.
9. Pull the bulb straight out from the keyed opening in
the housing.

Rear Tail, Turn Signal, and Backup Lamps

1. Remove the two push-pins from the tail lamp housing.
I n f o r m a t i o n P r o v i d e d b y :
MAINTAINING YOUR VEHICLE 431
7