Lexmark E 250d User Manual page 89

Symptom
Ghost Images
Uneven printing
DE
DE
DE
(Print only appears on one side of the
page.)
Incorrect margins
Skewed print
(Print is inappropriately slanted.)
Blank pages
*
To replace the fuser, call a service technician.
†
This setting can be changed using the Local Printer Settings Utility.
Print quality problems
Cause
• The Form Type setting in the printer
driver is set incorrectly.
• Toner level is low in the toner
cartridge.
The toner cartridge is not properly
installed.
The Form Size setting in the printer
driver is different from the size paper
that is loaded in the tray. For example,
A4 size paper was inserted into the
selected tray, but the Form Size
setting was not changed to A4.
• The guides in the selected tray are
not in the correct position for the
paper size loaded in the tray.
• The manual feeder guides are not in
the correct position for the paper
size loaded in the feeder.
The toner cartridge is defective,
empty, or improperly installed.
89
Solution
• Make sure the Form Type setting is
correct for the paper or specialty
print media being used.
• Replace the toner cartridge.
Remove and then reinsert the toner
cartridge.
Set the Form Size to match the paper
size that is loaded in the tray.
• Adjust the guides in the tray so that
there is a slight gap between the
rear guide and the print media.
• Move the manual feeder guides so
that they lightly touch the sides of
the print media.
• Remove and then reinsert the toner
cartridge.
• Replace the toner cartridge.