Table of Contents
Advertisement
Re-enter the New password.
Pressing the Enter button on the last character will
complete the password selection.
If the password in the Confirmation Box matches
the password from the Password box, this message
will appear.
Press the Enter button to select [OK] and exit the
menu.
If the password in the Confirmation Box does not
match the password from the Password box, this
message will appear.
Press the Enter button to select [OK] and exit the
menu.
Advanced Menu → Languages
5.11
Use this menu to select the language the DSR will display.
Advanced Menu → Firmware Upgrade
5.12
Use this menu to Flash upgrade the DSR via the RS232 Serial port. The preferred method to upgrade
the unit is via the ethernet using the built-in WaveBrowser (See section 6).
WARNING!!! Do not power off unit until the operation is done,
To upgrade the DSR from this menu requires the following items:
•
A PC connected to the DSR via the serial port with a null modem cable.
•
The WinFlash program.
•
The upgrade file.
For further information and for obtaining the upgrade files and WinFlash program please contact GE
Please Re-Enter The Password
The New Password Has Been Accepted!
The Password Was Not Changed!
Firmware Upgrade
Do you want to continue?
[OK]
[CANCEL]
Confirmation Box
O---
Message
[OK]
Message
[OK]
Advertisement
Table of Contents
