I Transferring Memory Contents; I Memory Mode Menu; (Regular Memory And Group Memory Channels Only) - Icom iC-A210 Instruction Manual

3
MEMORY OPERATION
I Transferring memory
contents
This function transfers a memory channel's contents into the
active frequency indicator.
q Push [RCL] to enter the memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the desired memory channel
type.
• Select regular, group history, weather* or GPS memory channel.
* Selectable depending on versions.
e Rotate [DIAL] to select a memory channel to be trans-
ferred.
r Push [£], then the selected memory channel is trans-
ferred into the active frequency indicator.
• The memory mode is cancelled automatically.
12
RX
MEMORY
122.00 127.00
5
CH01
Push [£].
RX
MEMORY
127.00 122.00
5

I Memory mode menu

(Regular and group memory
channels only)
ï REPLACE
Replacing the selected memory channel to the standby fre-
quency.
ï DELETE
Deleting the selected memory channel.
ï REVIVE
Returning the selected memory channel to its previous state.
ï CH NAME (Regular memory channel only)
Setting the channel name to the selected regular memory
channel.
ï GRP NAME (Group memory channel only)
Setting the group name to the selected memory group.
ï CH TAG (Group memory channel only)
Setting the channel tag to the selected memory channel (Se-
lecting the group memory channel is the only option).
ï DONE
Return to the memory mode.