Air Filter - Derbi GP1 50 cc Workshop Manual

A A
IR FILTER IR FILTER
- Remove the cleaner plug by unloosing the 6 fixing screws.
Remove the filtering element.
Cleaning:
-Wash with water and neutral soap.
-Dry with a clean cloth and small jets of compressed air.
-Soak with a 50 fuel/oil mixture.
-Let the filtering element drain and then squeeze it with your
hands without crushing it.
-Let it dry and refit it. Mineral oil with special additives to
increase its adhesiveness ISO VG 150
CAUTION
NEVER RUN THE ENGINE WITHOUT THE AIR FILTER, THIS
WOULD RESULT IN AN EXCESSIVE WEAT OF THE PISTON
AND CYLINDER
Recommended products
Mineral oil with specific additives to increase adhesion ISO
VG 150
31