Projecting Over A Network - Epson PowerLite 1705c User Manual

Projecting Over a Network

Once you've started EasyMP and set up your projector and computer
in either Ad Hoc (Quick) mode or Access Point (Advanced) mode, or
in the optional wired LAN mode, as described on page 89, follow
these steps to start NS Connection and project over the network.
1. Make sure you've set up your projector (see page 48).
2. Windows: Select
Mac OS X: Double-click the
Applications folder.
3. The first time you start NS Connection, you see this dialog box.
Choose a connection mode and click
4. If you see a message asking you to disable the firewall, click
make an exception for the projector and allow projection.
Downloaded From projector-manual.com Epson Manuals
EMP NS Connection
EMP NS Connection
OK
from the Start menu.
icon in your
.
to
Yes
Presenting Through a Wireless Network
note
If you don't see your network
adapter's IP address, allow a
minute for it to appear. If
your access point or AirPort
base station uses DHCP
(
Distribute IP addresses
setting is enabled for
AirPort), sometimes it takes
a minute for the server to
pick up the IP address.
Once you've selected the IP
address for your network
adapter, you won't see the
Switch network dialog
box when you start
NS Connection. If you want
to change to a different
network adapter, click
on the EMP NS
Extension
Connection dialog box, then
click on the
Switch LAN
extension dialog box.
73