Getting Started; Overview; Location And Function Of Parts And Controls; Front Panel - Sony UP-D711MD Instructions For Use Manual

Getting Started

Overview

Quiet, High Quality, Fast Printing
• Employs a thin thermal head with a built-in high speed
drive IC, capable of high resolution images of 11.8
dots/mm.
• Print speeds of approximately 1 high quality image
(896 × 1196 dots (approx. 76 × 101mm)) every 5
seconds when the "High Speed Print Mode" checkbox
is on.
• Standard image memory capable of handling and
printing images up to 896 × 2688 dots (approx. 76 ×
227mm).
• Monochrome printing with up to 256 shades of
gradation.
USB interface
The unit is equipped with a USB connector which
complies with the USB specification.
Easy Paper Loading
Free access to the door allows you to drop paper into the
unit for easy loading.
8
Overview / Location and Function of Parts and Controls
Location and Function
of Parts and Controls
For more details, see the referenced page numbers
enclosed in parentheses ( ).

Front Panel

A 1 On/standby switch/lamp (12, 13, 15)
Press to turn the unit on (lamp lights).
B PRINT lamp
Lights while printing.
C
FEED button (12, 13)
Hold down to feed paper.
The paper will only feed when the button remains
pressed.
If insufficient paper has been fed after printing,
press the button for a short time to feed extra paper.
For details on feeding paper after printing, see
"Setup Guide."
Press to cancel a print job that is currently in
progress.
D PAPER lamp
Lights when the paper is not set in the tray correctly
or if the tray is empty.
E ALARM lamp
Lights when the door is open or if a problem occurs
in the printer.
F
OPEN button (12)
Press to open the door.
Press and hold down this button all the way, to open
the door.
G
Paper cutter
Cuts the paper as each image is printed.
PRINT
FEED
PAPER
ALARM
OPEN