Axis P3367-VE Installation Manual
Network camera
Hide thumbs
Also See for P3367-VE:
- User manual (68 pages) ,
- Installation manual (168 pages) ,
- Installation manual (146 pages)
Related Manuals for Axis P3367-VE
Summary of Contents for Axis P3367-VE
- Page 1 INSTALLATION GUIDE AXIS P3346-VE Network Camera AXIS P3367-VE Network Camera AXIS P3384-VE Network Camera...
- Page 2 Every care has been taken in the preparation of this document. Please inform your local Axis office of any Using an unshielded network cable (UTP) - AXIS P3367-VE inaccuracies or omissions. Axis Communications AB cannot and AXIS P3384-VE have been tested using an unshielded...
-
Page 3: Learn More
Internet, you can: • download user documentation and software updates • find answers to resolved problems in the FAQ database. Search by product, category, or phrase • report problems to Axis support staff by logging in to your private support area... -
Page 5: Safety Information
AXIS P33-VE Series Installation Guide Page 5 Safety Information Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference. Hazard Levels Indicates a hazardous situation which, if not avoided, will result in death or serious injury. -
Page 6: Safety Instructions
• Use only accessories that comply with technical specification of the product. These can be provided by Axis or a third party. • Use only spare parts provided by or recommended by Axis. • Do not attempt to repair the product by yourself. Contact Axis support or your Axis reseller for service matters. Transportation •... -
Page 7: Dome Cover
Page 7 Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real- time clock (RTC). Under normal conditions this battery will last for a minimum of five years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. -
Page 8: Table Of Contents
• Before you begin, make sure that the package contents, power supply, and the required cables, tools, and documentation are available. See Package Contents below. • This network camera is intended to operate with PoE; if not available use Axis PoE Midspan 1 port (not included) -
Page 9: Package Contents
Resitorx screw driver, drill template, 5-meter network cable with gasket 4 screws and plugs, 2 long screws, 2 M4x8 screws 1 gasket, terminal block connector AXIS Network Video Product CD including product documentation, installation tools and other software Printed Materials... -
Page 10: Hardware Overview
The heater in the camera unit may be hot. Dimension (HxW) AXIS P3346-VE = 117 x 179 mm (4.59” x 7.05”) AXIS P3367-VE = 117 x 179 mm (4.59” x 7.05”) AXIS P3384-VE = 117 x 179 mm (4.59” x 7.05”) Weight AXIS P3346-VE = 1.6 kg (3.5 lb) -
Page 11: Led Indicators
AXIS P33-VE Series Installation Guide Page 11 LED Indicators Color Indication Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity. Amber Steady for connection to 10 Mbit/s network. Flashes for network activity. Unlit No network connection. -
Page 12: Network Connector
AXIS P33-VE Series Installation Guide Connectors Network Connector AXIS P3367-VE and AXIS AXIS P3384-VE: Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors or in demanding electrical environments shall be intended for their specific use. - Page 13 AXIS P33-VE Series Installation Guide Page 13 I/O Connectors I/O terminal connector - Used in applications for e.g. motion detec- • tion, event triggering, time lapse recording and alarm notifications. In addition to an auxiliary power and a GND pin, it provides the...
- Page 14 Page 14 AXIS P33-VE Series Installation Guide The following connection diagram gives an example of how to connect an auxiliary device to the AXIS P3346-VE/P3367-VE/P3384-VE. E.g. push button 3.3V max. 50mA...
-
Page 15: Install The Hardware
AXIS P33-VE Series Installation Guide Page 15 Install the Hardware Please remove the rubber band for transport-safety from the camera unit before you mount the camera. Prepare the Network Cable For network cable specifications, see Network Connector, on page 12. -
Page 16: Mounting Bracket
Top part Bottom part Replace Clear/Smoked Dome Cover (optional) The AXIS P3346-VE/P3367-VE/P3384-VE is supplied with an optional dome. To replace the dome cover: 1. Loosen the 4 screws under the dome cover that hold the dome in place. 2. Replace the old dome with the new and tighten the screws. - Page 17 AXIS P33-VE Series Installation Guide Page 17 Route the Cables Depending on whether you want to route the cables through or along the wall, follow the relevant instructions below. Routing Cables along the Wall 1. Using the drill template drill 4 holes in the wall.
- Page 18 Page 18 AXIS P33-VE Series Installation Guide 8. Attach the unit casing to the mounting bracket by tightening the four screws. Remove gaskets from holes Mounting bracket Unit casing Network cable with gasket...
- Page 19 AXIS P33-VE Series Installation Guide Page 19 Install the Camera Unit Connector for fan Camera unit Attach screw to camera Network cable 1. Attach the network cable to the camera unit; and the cable for audio and I/O if required. It is recommended that the network cable is twisted to a loop as shown in the illustration above.
- Page 20 Page 20 AXIS P33-VE Series Installation Guide The AXIS P3346-VE/P3367-VE/P3384-VE can also be fitted with a metal conduit for protecting the cabling when cables are routed along the wall. Conduit...
-
Page 21: Access The Product
AXIS P33-VE Series Installation Guide Page 21 Access the Product Use the tools provided on the Installation and Management Software CD to assign an IP address, set the password and access the video stream. This information is also available from the support pages on www.axis.com/techsup/... - Page 22 Page 22 AXIS P33-VE Series Installation Guide Open the Live View page in the web interface and make the following adjustments to the camera: Horizontal line Tilt adjustment screw Tilt adjustment screw Locking screw 1. Loosen the locking screw and tilt adjustment screws.
-
Page 23: Complete The Installation
AXIS P33-VE Series Installation Guide Page 23 Complete the Installation Black protective 1. Rotate the black protective shield inside the dome cover shield so it is aligned with the camera’s position. 2. If required, attach the weather shield to the camera before you attach the dome cover. -
Page 24: Reset To Factory Default Settings
Further information The user’s manual is available from the Axis web site at www.axis.com or from the Axis Network Video Product CD supplied with this product. Visit www.axis.com/techsup to check if there is updated firmware available for the AXIS P33-VE Series. - Page 26 Ver. 4.2 Installation Guide Printed: October 2014 AXIS P3346-VE/AXIS P3367-VE/AXIS P3384-VE Part No. 50609 © Axis Communications AB, 2014...