NO
SERVICEABLE PARTS INSlDE
are indicated by" A " mark on the schematic diagram and the replacement parts list. It is essential
that these critical
fire, or other hazards.
Do not modify the original design without permission of
SPECIFICATIONS
Video Monitor WV-BM90
Power Supply
Power Consumption
Camera Input
Video Input
Video Output
Power Supply for Camera
Camera Switching
Sequential Switching Interval
Resolution (Horizontal)
Sweep Linearity
External Control Connection Terminal
Camera Extension Input
Alarm Time
Dimensions
Weight
OPTIONAL ACCESSORIES
o Optional Accessory for WV-BM90
o Camera Extension Unit
This symbol warns the user that uninsulated voltage
within the unit may have suificient magnitude to
cause electric shock. Therefore, it is dangerous to
make any kind of contact with any inside part of
This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included.
Therefore, it should be read carefully in order to
avoid any problems.
IMPORTANT SAFETY NOTICE
used in this equipment which are important for safety. These parts
should be replaced with manufacture's specified parts to prevent shock,
AC 50Hz for WV-BMSOIA and WV-BMSO/B
220V AC 50Hz for WV-BMSO/C, WV-BMSOIG and WV-BM90lF
1 .OVp-p/75 ohms, composite x 4 (BNC)
Regulated current multiplex method
Manual/Auto (Sequence) With auto and manual bypass
Adjustable; 1 to 30 sec.
750 lines at center
Less than 7%
Less than 5%
H:
SPOT MONITOR CONTROL IN x 4
RECOVER IN x 1
ALARM CONTROL OUT x 2
REMOTE OUT x 4
RESET OUT x 1
10 pin connector
Adjustable: 2 to 30 sec.
230 (W) x 240 (H) x 270 (D) m m
WV-83
\