AllerAir 4000 series Operation And Maintenance Manual page 5

REFILLING THE CARBON CANISTER
Your AllerAir unit contains a refillable carbon filter. You may choose to refill it* or simply purchase a

new filter.
Tools Required: Philips screwdriver, garbage bag large enough to hold all of the old carbon, rubber mallet.
*When changing the carbon filter, it should be placed on a newspaper or protective surface as it may leak some carbon particles.
AllerAir makes a special funnel to evenly refill carbon filters. Call 1-888-852-8247 during regular

business hours (EST) or send an e-mail to info@allerair.com.
STEP 1
Remove the carbon filter from the unit
by pressing thumbs against the inner
rim and pulling up.
STEP 4
Pour in the new carbon, using a funnel
if desired. As you pour, tap the sides
of the filter with the rubber mallet to
help settle the carbon granules.
Empty Carbon Canisters Order Guide
Models 4000
2" Canister** A4FC0500
2.5" Canister** A4FC1500
D Models A4FC2500
DX Models A4FC3500
Bulk Carbon Order Guide
Models
Exec Mix
Vocarb Mix
Tobacco Smoke Mix
MCS Mix
Special Blend Mix
Visit our indoor air quality library: http://www.allerair.com/air-quality-library/index.html
STEP 2
Gently pull back the pre-filter to
access the four screws at the top of
the filter. Remove the screws with a
Philips screwdriver and take off the
lid of the filter.
STEP 5
When the filter is full, replace the lid
and its screws. Adjust the pre-filter,
and gently slide the filter back into
the unit.
5000 6000
A5FC0500 A6FC0500
A5FC1500 A6FC1500
A5FC2500 A6FC2500
A5FC3500 A6FC3500
4000 5000
AM000911 AM000911
AM000912 AM000912
AM000912 AM000912
AM000901 AM000901
Notes
Exec & Vocarb; MCS models
Exec & Vocarb models
–
–
6000
AM000911
AM000912
AM000912
AM000901
Please Call
4000/5000/6000 Series
STEP 3
Discard all of the old carbon. Pour
it into a garbage bag of adequate
size and tie the bag shut.
STEP 6
Replace the felt gasket. Replace
the base of the unit. Align the
arrow on the gold sticker with the
unit's seam, and replace the four
screws with a Philips screwdriver.
Please use these part
numbers when ordering
your replacement parts.
**Please refer to your
carbon filter depth when
ordering a replacement.
Please use these part
numbers when ordering
your replacement parts.
5