Indications And Displays On The Receiver - Sennheiser EW 300 G2 Instructions For Use Manual

Indications and displays on the receiver

Transmitter battery status indication
The 4-step transmitter battery status display
provides information on the transmitter's remaining battery/accupack
BA 2015 capacity:
3 segments:
2 segments:
1 segment:
Battery icon flashing:
"MUTE" display
The "MUTE" display
the standard display switches from green to red. In addition, the text "MUTE"
flashes in alternation with the standard display when
the RF signal of the received transmitter is too weak,
the received transmitter has been muted (with the pilot tone transmission
or evaluation activated).
Modulation display
The level display for audio signal "AF" shows the modulation of the received
transmitter.
When the transmitter's audio input level is excessively high (AF peak), the
receiver's level display for audio signal "AF"
When the transmitter is overmodulated frequently or for an extended period
of time, the text "PEAK" (backlit in red) flashes in alternation with the
standard display.
"PILOT" display
The "PILOT" display
(see "Activating/deactivating the pilot tone transmission or pilot tone
evaluation" on page 79).
capacity approx. 100 %
capacity approx. 70 %
capacity approx. 30 %
LOW BAT
In addition, the text "LOW BAT" (backlit in red)
flashes in alternation with the standard display.
appears on the display panel and the backlighting of
lights up when the pilot tone evaluation is activated
on the receiver display panel
shows full deflection.
55