Advertisement
Transferring Photos to Your Photo Player
You should transfer your photos to the photo player before assembling the snow globe.
When you connect to your PC you are given two options.
Slideshow Photos – begins a slideshow of all the photos stored on your photo player.
Connect to PC - allows you run the photo transfer programs to transfer and delete photos stored on the photo player.
Tilt the photo player 90 degrees to the left or right to make your selection. To follow the remaining instructions in this
section tilt the photo player to the right.
a. Connect the mini USB connector to the photo player, and connect the other end of the USB cable to your PC's
USB port. The photo player will be detected automatically if you are using Windows XP or Windows Vista.
b. If the photo player is already assembled, connect the mini USB connector through the base of the snow globe
and other end of the USB cable to the PC and then turn on the power switch at the bottom of the Snow Globe
c. In Windows XP - The Photo Transfer window will pop up and using this window you can transfer photos from
your PC to the photo player.
Photo player
USB cable
Base
.
2
Advertisement
