Recording
The picture cannot be recorded.
•
Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase available space in the memory.
•
You may not be able to record for a short while after turning this unit on when using a large capacity
card.
The recorded picture is whitish.
•
The picture can become whitish if there is dirt, e.g. fingerprints on the lens.
> If the lens is dirty, turn on the camera, eject the lens barrel and gently wipe the lens surface with
a soft, dry cloth.
The recorded picture is too bright or dark.
•
Check that the exposure is correctly compensated.
Multiple pictures are taken at one time.
•
Set [Burst Shooting]
The subject is not focused properly.
•
The focus range varies depending on the Recording Mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
The recorded picture is blurred.
The Optical Image Stabiliser is not effective.
•
The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly
with both hands to take the pictures.
•
When taking pictures at a slow shutter speed, use the Self-timer.
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
> Take pictures in bright places.
•
Have you set [High Sens.] in Scene Mode, or [Burst Shooting] in [Rec] menu to [
If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing,
but this is not a malfunction.
(P82)
of the [Rec] menu to [OFF].
(P24)
(P76)
Others
(P60)
(P31)
(P24)
(P59)
- 146 -
(P37)
]?