La Crosse Technology WS- 1910TWC-IT Instruction Manual page 32

The Thermo-hygro Sensor
Rain Cover
Main Unit
An ideal mounting place for the thermo-hygro sensor would be the outer wall beneath the
extension of a roof, as this will protect the sensor from direct sunlight and other extreme
weather conditions. Be sure to mount vertically.
To wall mount, use the 2 screws to affix the wall bracket to the desired wall, plug in the
thermo-hygro sensor to the bracket and secure both parts by the use of the supplied screw
and ensure that the cable from the wind sensor is correctly plugged in otherwise data
transmission errors could occur.
The Wind Sensor
Wall Bracket
Wind -cups
Horizontal panel
Vertical
mast
32