Troubleshooting - Durabrand DSP-19A Operating Instructions Manual

Stereo active speaker system
Table of Contents

Advertisement

TROUBLE SHOOTING
Symptom
No power.
T h e
POWER
LED
indicator
blinks
gets dim.
No sound or only a
very low-level sound
is heard.
Distorted sound.
IB-DSP19A-WM-E-062006.pmd
1. Is the power switched to the OFF position? Slide it to ON.
2. Were the batteries inserted correctly? Please make sure 4 size
" A A A " a l k a l i n e b a t t e r i e s a r e i n s e r t e d i n t o b a t t e r y
compartment according to the + and – markings on the
bottom of the set.
3. Is the adaptor cord firmly plugged into the adaptor jack?
Insert the AC adaptor plug securely into the speaker.
The batteries are weak, please replace the batteries with new
or
ones or use the supplied AC adaptor.
1. Check that the speaker AUDIO IN cable is connected securely
and correctly. Make sure the cable is inserted well.
2. Make sure your speaker has power and POWER switch is
in the ON position.
3. Make sure the input source CD player/MP3 player/computer
works well.
4. Adjust the speaker system and CD player/MP3 player/computer
volume control.
5. The batteries are weak, please replace the batteries with
new ones or use the supplied AC adaptor.
1. Reduce input source volume or the speaker volume.
2. The batteries are weak, please replace the batteries with
new ones or use the supplied AC adaptor.
5
Remedy
4
7/4/2006, 5:46 PM
IB-DSP19A-WM-E-062006

Advertisement

Table of Contents
loading

Table of Contents