Panasonic KX-HDV130 Operating Instructions Manual page 52

Installation and Setup
Connections
Connect the Ethernet cable, the Handset Cord and the AC adaptor (Option) to the unit.
*1 PoE HUB
*2 Optional AC adaptor
*3 Optional headset
For up-to-date information about headsets that have been tested with this unit, refer to the following
web sites:
http://panasonic.net/pcc/support/sipphone/
R The initial setting for the IP address is "DHCP—Auto". For information about your network
environment, contact your administrator. For details, see "Network Settings", Page 64.
When selecting Ethernet cables (not included)
R Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack
when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
52
*1
*2
*3