Advanced Playback
Slow-motion Play
RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
While paused
or
–
There are 5 slow-motion speeds. Each press
increases the speed.
–
Press [q PLAY] to restart normal playback.
Notes
•
If continued for approx. 5 minutes, slow-motion play pauses
automatically (except
Frame-by-Frame Viewing
RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
While paused
–
Each press shows the next or previous frame.
–
Press and hold to advance or reverse frame-by-
frame in succession.
–
Press [q PLAY] to restart normal playback.
Time Slip
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Use to skip in 1-minute or 10-minute increments.
During playback
e, r to select the time, then
Each press of e or r advances the interval
–
by 1 minute (press and hold for 10-minute
intervals).
CM Skip
RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Skips 1-minute forward with each press.
During playback
18
Downloaded From Disc-Player.com Panasonic Manuals
RQT8851
).
DVD-V
Create Chapters
RAM
During playback
Tips
•
You can skip to the start of a chapter by pressing [u, i].
Changing Audio during Playback
to select the audio.
Available audio will differ based on disc type.
See below.
and DivX
RAM -RW(VR)
Stereo
Mono L
Mono R
When playing an analog multilingual
RAM -RW(VR)
broadcast, you can choose between Main Audio and
SAP Audio.
Main Audio
SAP Audio
DVD-V
This allows you to change items like the audio channel
number and the soundtrack language (➔ 36).
Soundtrack
1 ENG
e.g., English is the selected language.
Notes
•
If you cannot change the audio type when you have used only
an optical digital audio cable for connection, set "Dolby Digital" to
"PCM" (➔ 39). Alternatively, you may connect to an amplifier or
system component with an audio cable and change the input on the
amplifier or system component to suit the connection (➔ 52).
DVD-RAM
e.g.:
RAM
Play
"Stereo" is
selected.
Stereo
Digital 3/2.1ch