Table of Contents
Advertisement
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player's instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not
supplied.
•
If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
"Input Selection" section.
•
Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, "Input selection" section.
•
You may also connect through the SCART 1 or
SCART 2. Use a SCART cable as shown below.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
00_MB63D_[GB]_5100UK_DVB-TC_PLATINIUM6_46915LED_10070722_50178707_V1.indd 13
00_MB63D_[GB]_5100UK_DVB-TC_PLATINIUM6_46915LED_10070722_50178707_V1.indd 13
Using Side AV Connectors
You can connect a range of optional equipment to your
LCD TV using side connectors of the TV.
•
For connecting a camcorder or camera , you should
use AV socket (side). To do this, you must use the
supplied audio/video connection cable. First, plug
single jack of the cable to the TV's AV IN socket
(side). Afterwards, insert your camera cable's (not
supplied) connectors into the plural part of the audio/
video connection cable. Colours of the connected
jacks should match. See illustration below.
•
Afterwards, you should switch to
See the section Input selection in the following
sections for more information.
•
To listen the TV sound from headphones, you
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
Using Other Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
•
For connecting a to a device that has SPDIF support,
use an appropriate SPDIF cable to enable sound
connection.
English - 13 -
Side AV source.
11.01.2011 17:02:14
11.01.2011 17:02:14
Advertisement
Table of Contents
