Download Print this page

Battery Installation - Durabrand 822 Operating Instructions Manual

Lennox electronics cassette player operating instructions 822

Advertisement

IB-822(CL)-WM-E-070506.pmd

BATTERY INSTALLATION

Slide the BATTERY DOOR in the direction shown by the arrow
to open the door and insert 2 "AA" batteries, taking care not to
reverse the positive and negative polarities.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
NOTE:
Remove the batteries during long periods (about 30 days
or more) of nonuse, possible battery leakage and corrosion
can damage the set.
If the sound becomes weak and unclear, the batteries may
be weak. Replace both batteries at once.
TO INSERT THE TAPE
1. Open the CASSETTE DOOR by holding the door as shown
and gently pulling it to you.
2. Insert the tape into the cassette holder ON THE DOOR.
3. Close the CASSETTE DOOR gently till it clicks shut.
CAUTION: Do not pull door too strongly or you may damage
the door, treat this set with care and it will last a
long time.
4
Alkaline
batteries
recommended
normally provide more playing
time.
--- 4 ---
IB-822(CL)-WM-E-070506
are
and
will
7/6/2006, 11:57 AM

Advertisement

loading