Removing The Rear Fan - Lenovo ThinkServer TD230 Hardware Maintenance Manual
Machine types: 1027, 1029, 1039, and 1040
Hide thumbs
Also See for ThinkServer TD230:
- Installations- und benutzerhandbuch (162 pages) ,
- Guía del usuario y de instalación manual (162 pages) ,
- Manual d’installation et d’utilisation (160 pages)
Table of Contents
Advertisement
Removing the rear fan
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
"Guidelines" on page 39. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove the rear fan.
DANGER
Hazardous moving parts. Keep fingers and other body parts away.
To remove the rear fan, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See "Removing the server cover" on page 43.
3. Locate the rear fan. See "Locating server components" on page 32.
4. Disconnect the rear fan cable from the system fan 3 connector on the system board. See "Locating
parts on the system board" on page 33.
106
ThinkServer TD230 Hardware Maintenance Manual
Advertisement
Table of Contents
