Table of Contents
Advertisement
AWB Paint
For adjusting the R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to "[Adjusting the White Balance]
(A P 60)".
Increase the number:
0
Strengthens the red/blue.
Decrease the number:
0
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Memo :
This item is selectable when the [WHT.BAL
0
B/A/PRST] switch on the right of the camera
recorder is set to "A" or "B". When "PRST" is set,
this item appears as "---" and cannot be
selected.
Different values can be specified for "A" and "B".
0
When [Clear Paint After AWB] is set to "On",
0
pressing the [AWB/9] button to readjust the
white balance switches the R and B values
automatically to "0".
Clear Paint After AWB
For specifying whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
On:
0
Sets the [AWB Paint] (R value and B value)
settings to "0" after executing AWB (Auto White
Balance).
Off:
0
Does not change the [AWB Paint] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values: ROn, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
Increase the number:
0
Strengthens the red/blue.
Decrease the number:
0
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
TC/UB Menu
Menu screen for setting time code and user's bit.
This item cannot be selected in the Media mode,
or during recording.
TC Generator
For setting the operation of the time code.
Free Run:
0
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
Rec Run:
0
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the SD card is not
replaced. If the SD card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
Regen:
0
The time code operates in the run mode during
recording. When the SD card is replaced, the
last time code recorded on the card is read and
recorded on a new card so that the time code
continues in running order.
[Setting Values: Free Run, RRec Run, Regen]
TC Preset
For setting the time code (hour, minute, second,
frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
UB Mode
For setting the recording mode of the user's bit.
Date:
0
Records the date.
Time:
0
Records the time.
Preset:
0
Records according to the preset setting.
(A P71 [Setting the User's Bit] )
[Setting Values: Date, Time, RPreset]
Memo :
If UB Mode is set to "Time", the user's bit
0
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
Camera Process Menu
103
Advertisement
Table of Contents
