Table of Contents
Advertisement
3. Position the computer cover on the chassis so that the rail guides on the bottom
4. If a cover lock is installed, lock the cover.
5. Reconnect the external cables and power cords into the computer. See
6. If you are replacing the system board or microprocessor, you must update
7. To update your configuration, see "Starting the Setup Utility" in the Quick
Note: In most areas of the world, Lenovo requires the return of the defective CRU.
Information about this will come with the CRU or will come a few days after the
CRU arrives.
30
Hardware Replacement Guide
of the computer cover engage the rails. Then, push the computer cover closed
and install the screws.
"Locating connectors on the front of the computer" on page 2 and "Locating
connectors on the rear of the computer" on page 3.
(flash) the BIOS. See "Updating (flashing) BIOS from a diskette or CD-ROM"
on page 31.
Reference that was included with your computer or in the Hardware Maintenance
Manual.
Advertisement
Table of Contents
