Completing The Fru Replacement - Lenovo ThinkCentre 7673 Hardware Maintenance Manual

;
Figure 29. Removing the internal speaker
5. Position the new internal speaker into the metal clips
secured by the lock latch
6. Connect the new internal speaker cable to the system board.
7. Go to "Completing the FRU replacement" on page 89.

Completing the FRU replacement

This section provides instructions on how to complete the parts replacement.
After completing all parts replacement, you need to close the cover and reconnect cables, such as power
cords. Depending on the parts replaced, you might need to confirm the updated information in the Setup
Utility program. See Chapter 6 "Using the Setup Utility program" on page 43.
To complete the parts replacement:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See "Locating components" on page 69 for the location of various components.
2. Make sure that the cables are routed correctly before closing the computer cover.
1 .
2 and push the internal speaker upwards until it is
Chapter 8
89
.
Replacing FRUs