LG 22LV2500 Service Manual page 13

• Adj. condition and cautionary items
1) Lighting condition in surrounding area
Surrounding lighting should be lower 10 lux. Try to isolate
adj. area into dark surrounding.
2) Probe location : Color Analyzer (CA-210) probe should be
within 10cm and perpendicular of the module surface (80°~
100°)
3) Aging time
- After Aging Start, Keep the Power ON status during 5
Minutes.
- In case of LCD, Back-light on should be checked using no
signal or Full-white pattern.
5.1.6 Reference (White Balance Adj. coordinate and color
temperature)
(1) Luminance: 204 Gray, 80IRE
(2) Standard color coordinate and temperature using CS-1000
(over 26 inch)
Mode Color Coordination
x
COOL 0.269
MEDIUM 0.285
WARM 0.313
• Standard color coordinate and temperature using CA-
210(CH 9)
Mode Color Coordination
x
COOL 0.269±0.002
MEDIUM 0.285±0.002
WARM 0.313+0.002
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
∆UV
Temp
y
0.273 13000K 0.0000
0.293 9300K 0.0000
0.329 6500K 0.0000
Temp
y
0.273±0.002 13000K 0.0000
0.293±0.002 9300K 0.0000
0.329±0.002 6500K 0.0000
5.2 HDCP
Contents Protection) SETTING
5.3 Option selection per country
5.3.1 Overview
• Option selection is only done for models in Non-USA North
America due to rating
• Applied model: LA01U Chassis applied None USA
model(CANADA, MEXICO)
5.3.2 Method
(1) Press ADJ key on the Adj. R/C, and then select Country
Group Menu
(2) Depending on destination, select KR or US, then on the
lower Country option, select US, CA, MX. Selection is
done using +, - KEY
5.4 Tool Option selection
• Method: Press Adj. key on the Adj. R/C, then select Tool
option.
Model Tool1
26LK330-UB 13896 18966
∆UV
5.5 Ship-out mode check (In-stop)
• After final inspection, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode.
- 13 -
(High-Bandwidth
Tool2 Tool3 Tool4
51209 2328
LGE Internal Use Only
Digital
Tool5 Menu
290 AUO