Philips CDC775/00 Service Manual page 8

PLAYBACK
Selecting Another Track During Play
( S T )
• Press T or S (less than 0.5 seconds) until the
desired track number appears under TRACK.
TRACK
5
– The music stops and a moment later the selected
track begins to play.
WRONG tRACK lights up when you select a non-
existent track number.
Selecting Another CD During Play (CD
DIRECT PLAY)
• Key in the desired CD number.
– The music stops and a moment later the selected CD
begins to play.
WRONG dISC lights up if you select a non-existent
number.
You can also select the number by using the DISC
button on the remote control.
Searching For A Passage During Play
( S T )
• Hold S down to search backwards to the
beginning.
• Hold T down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
– the first 2 seconds fairly slowly, with sound;
– then at the maximum speed, with no sound.
10
Playing In Random Order (SHUFFLE)
All CDs:
• Press SHUFFLE before or during play.
– If the CD compartment was open, it will now close.
– SHUFFLE lights up and all the tracks are now played
in a random order.
TRACK
3
SHUFFLE
– If you press T
,
you will select any one of the
following tracks.
• Press SHUFFLE again if you wish to return to normal
play.
NOTE!
– If, during play, you open the CD compartment to
change CDs (see 'NORMAL PLAYBACK') then
playback in random order will be cancelled. Playback
will stop as soon as the last track of the current CD
has been played (in normal order).
Calling Up Information On Display
(TIME)
In STOP mode:
Text display
– After loading the CDs and closing the CD
compartment, the display shows the number of the
CD to be played (= default display in STOP mode).
3 1
2
PCS 101 011
If you reach the end of the last track and release T,
play will resume a few seconds before the end of the
CD.
Starting With A Particular CD
TRACK TIME (CD DIRECT PLAY)
• Key in the required CD number.
– If the CD compartment was open, it will now close.
– Play starts from the selected CD.
WRONG dISC lights up if you select a non-existent
number.
You can also select the number by using the DISC
button on the remote control.
Starting With A Particular Track
(CD DIRECT PLAY, S T and PLAY
2)
• First select the number of the required CD using CD
DIRECT PLAY or DISC on the remote control.
– If the CD compartment was open, it will now close.
• Then select the (track) number by using T or
S (press less than 0.5 seconds).
• Press PLAY 2.
– Play starts from the selected track.
WRONG tRACK lights up when you select a non-
existent track number.
WRONG dISC lights up if you select a non-existent
number.
• Press TIME to shows the number of tracks and the
total playing time of the current CD (TOTAL TIME).
During play:
TRACK TIME
1. Time display
– When you start play (from STOP mode), the display
shows the elapsed playing time of the current track
(= default display in PLAY mode).
• Press TIME whenever you want to know the
remaining playing time of the current track (REM
TRACK TIME).
• Press TIME, if you wish to know the total playing
time from the beginning (TOTAL TIME).
• Press TIME again if you wish to know the remaining
playing time of the entire CD (TOTAL REM TIME).
Note :
– TOTAL REM(aining) TIME and TOTAL TIME indications
are not available in SHUFFLE mode.
2-4
Scanning CDs (SCAN)
All CDs:
• Press SCAN before or during play.
– If the CD compartment was open, it will now close.
– SCAN lights up and the first 10 seconds of each
track are played in turn (starting from the current
track). 10 seconds are counted down each time under
REM(aining) TRACK TIME.
• When the player reaches a track which you wish to
hear in full, press SCAN again or PLAY 2.
TOT
TRACK TIME
1
TRACK TRACK TIME
1
TRACK REM TRACK TIME
1
TRACK TOT TIME
1
TRACK TOT REM TIME
1
TRACK REM TRACK TIME
5
PLAYBACK
2. Text display
• If you press TIME again, you will switch to text
display; the display shows the number of the current
CD.
3 1
2
• If you wish to know the total playing time of the
entire CD you must go back to STOP mode first and
then press TIME.
– The display now shows the number of tracks and the
total playing time of the current CD (TOTAL TIME).
Repeating Play (REPEAT)
Repeating a track:
• Press REPEAT before or during playback of the CD.
– REPEAT 1 lights up; the track will now be repeated
continuously.
TRACK TRACK TIME
1
REPEAT 1
• Press REPEAT three times to stop the track being
repeated.
Repeating a CD:
• Press REPEAT twice before or during playback of the
CD.
– REPEAT DISC lights up; the CD will now be repeated
continuously.
TRACK TRACK TIME
1
REPEAT DISC
• Press REPEAT twice to stop the CD being repeated.
11