Lenovo ThinkPad T520 Hardware Maintenance Manual page 97

Table 32. Removal steps of LCD unit (continued)
Step Screw (quantity)
7
M2 × 4 mm, wafer-head, nylon-coated (2)
When installing:
• Make sure that you attach the LCD connector firmly.
• Make sure that you route the cables firmly and tape up in the proper positions as shown in this figure.
• When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables
to be damaged by the cable guides, or a wire to be broken.
Torque
Color
Black 0.181 Nm
(1.85 kgfcm)
.
Chapter 9 Removing and replacing a FRU
89