Table 21. Removal steps of PCI Express Mini Card for wireless WAN (continued)
Note: Plug the orange cable into the jack labeled MAIN, and the blue cable into the jack labeled AUX on the card.
1090 mSATA solid state drive
Note: If your computer is equipped with an mSATA solid state drive, it is installed in the WWAN card slot.
WWAN card and mSATA solid state drive are exclusive to each other.
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 60
•
"1030 DIMM slot cover" on page 62
•
"1060 Keyboard" on page 67
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Table 22. Removal steps of mSATA
Step
Screw (quantity)
4
Color
Torque
.
Chapter 9
Removing and replacing a FRU
75