Kenwood DNX7150DAB Instruction Manual page 17

Return to the Top page
Basic Operations
USB device
1
Connect the USB device with the
USB cable.
The unit reads the device and playback
starts.
● To disconnect the device:
Touch screen from the left end to display
the function panel.
Touch [ G ]. Disconnect the device from
the cable.
iPod
1
Connect the iPod.
2
Press the <HOME> button.
3
Touch [iPod] in the HOME screen.
(P.19)
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to
Video/Picture Basic Operation
● To disconnect the iPod/iPhone
connected with the cable:
Touch screen from the left end to display
the function panel.
Touch [ G ]. Disconnect the iPod/ iPhone
from the cable.
16 16
SD card
1
2
Music/
(P.36).
● To remove:
DNX7150DAB/ DNX715WDAB
Press the <0> button for 1 second
to open the front panel.
0
NOTE
Functions of the Buttons on the
• For details, see
Front Panel (P.6).
Insert the card into the slot until
it clicks.
The unit loads the card and playback starts.
DNX4150DAB/ DNX4150BT
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
NOTE
• A dummy micro SD card is inserted as the slot
cover. Remove it before using and keep it in an
appropriate place.