Lenovo ThinkVision L193p User Manual page 19

To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
then press to select that function. Use
save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold the
for 10 seconds to disable / enable DDC/CI function. The words " DDC/CI
Disable" or "DDC/CI Enable" will be displayed.
or to make adjustments. Press
and hold for 10 seconds to unlock the OSD and
Chapter 2. Adjusting and using your monitor
to access that
or ,
to
button
2-4