Lenovo LXH-GJ769F4 User Manual page 5

POWER CORD：
1. The monitor may work at 100---120VAC or 200---240V AC area. (No user adjustment is
required.)
2.
Connect the power cord into your monitor's power input socket, and then plug the other
end into a 3-pin AC power outlet.
Connecting the Video Cable:
cable's 15-pin connector into the computer's video port and tighten the two screws on the cable
connector. (See figure 2)
Caution: Don't bend the signal cable, otherwise it will break the inner wire.
Connecting the Power Cord：Plug the power cord into the monitor's AC power socket. Then
plug the power cord into a grounded AC outlet.
Caution：If the AC outlet is not grounded, install the proper grounding adapter (not supplied).
1.
Please keep your user manual, monitor packages on a safety place for further
using.
the monitor comes with a built-in video cable. Plug the signal
①
②
Figure 2. Connecting signal cable
Power Cord 2.
41CD785-608-4B
Signal Cable
5