SONIQ E40S12A-AU Instruction Manual page 19

Smart TV Function
4. After software downloading is completed, it may take some time for decoding:
Firmware Update
Local Update Network Update Backup Flrmware Recovery Flrmware
Start Network Update
Prompt: software downloaded has been completed, decoding is in progress. Please wait.
20% 20/100
1 /1
Home Refresh
5. After this step ,the system will firstly back up the file then update the file system.
backup system.
Prompt:
The system is in the process of updating and backing up your data ,Please do
not cut off the power, otherwise the system will breakdown and can not start up!
6. When the update is completed, the TV will automatically restart in 5 seconds.
7. Update completed
Remark: If updating fails or any abnormal phenomena, unplug the power cord, press and hold the POWER
button then plug in the power cord again, following these steps will restore the system to the previous level.
Network Manual Update
Network Update can also be realized through manual setting by following the below steps:
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to All Apps and press OK.
3 Press the Navigation buttons to scroll to Firmware Update and press OK.
4. Select Network Update by pressing direction keys.
5. Pressing Start Network Update from the displayed list will pop up a dialog box
Firmware Update
Local Update Network Update Backup Flrmware Recovery Flrmware
Do you want to update firmware? Remind you backup system before
update firmware. Notice!!! This action may damage your system!!!Do not
power off your system during update.
NO Yes
1 /1
Home Refresh
6. Press Yes to go to the next step. Repeat step 2-7 on Network Update
Updating file system 42%
Prompt:
The system is in the process of updating and backing up your data ,Please do
not cut off the power, otherwise the system will breakdown and can not start up!
-35-
Smart TV Function
Remark: Online software updating will erase the original data, so it is necessary for the user to backup the
important files.
Backup Firmware
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to All Apps and press OK.
3 Press the Navigation buttons to scroll to Firmware Update and press OK.
4. Select Backup Firmware by pressing direction keys.
5. Pressing Backup Firmware from the displayed list will pop up a dialog box.
Firmware Update
Local Update Network Update Backup Flrmware Recovery Flrmware
Do you want to back up system? Notice!!! This action may damage your
system. Do not power off your system during back up.
NO Yes
1 /1
Home Refresh
6. Choose Yes to enter the next step.
7. After backup firmware is completed, the TV will automatically restart in 5 seconds, and a successfully message
will pop up for users to confirm.
Firmware Update status
congratulations,Firmware Update back up successfully!!
OK
Note: Local Update and Recovery Firmware Functions will be available when there is SD card being installed.
Local Update
Users need to copy the file from the PC named update.zip to the SD card to start local update.
Note: Users need to go to www.soniq.com to download the related new software package.
Recovery Firmware
Users can recover the data before backed up in the SD card through operating this function.
-36-