Table of Contents
Advertisement
[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR Section
To check the VTR section, set the VTR to the "Forced VTR power ON" mode.
Operate the VTR functions using the adjustment remote commander (With the HOLD switch set in the OFF position).
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
I/F unit for LANC control
(J-6082-521-A)
FB-223 board
FP-050 flexible
board (6P)
CN8004
Caution
Connect only when checking
for ejection.
Connect this only when using
the LCD and the touch panel.
DCR-PC53E/PC55/PC55E
2. DISASSEMBLY
2. DISASSEMBLY
Adjustment remote
commander (RM-95)
CPC-15
(J-6082-564-A)
Mechanism deck
CN1003
CN1008
FP-042 flexible
board (37P)
VC-379 board
LCD block
Caution
Exiting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
Multi cable for service
(J-6082-535-A)
A/V
8
AC power
1
adaptor
AC IN
CN1006
CN1005
CN1002
CN1009
CN1013
FP-053
2-9
Monitor TV
Video (Yellow)
DC-IN
CN8505
J8601
CN8501
CR-049 board
FP-044 flexible
board (80P)
Advertisement
Table of Contents
