Uniden BC346XT User Manual page 215

<COMMAND CSC>
Go to Custom search and get reception status
Controller → Radio
①
CSC,ON[\r]
②
CSC,OFF[\r]
Radio → Controller
① CSC,[RSSI],[FRQ],[SQL][\r]
CSC,[RSSI],[FRQ],[SQL][\r]
CSC,[RSSI],[FRQ],[SQL][\r]
....
....
....
CSC,[RSSI],[FRQ],[SQL][\r]
② CSC,OK[\r]
[RSSI]
[FRQ]
[SQL]
This command outputs custom search status of each frequency sequentially.
Use CSC,OFF command to stop the output.
This command is invalid when the scanner is in Menu Mode, during Direct Entry
operation, during Quick Save operation.
<COMMAND PWR>
*Get RSSI Level
Controller → Radio
PWR[\r]
Radio → Controller
PWR,[RSSI],[FRQ][\r]
[RSSI]
[FRQ]
Returns current RSSI level and its frequency.
The order of the frequency digits is from 1 GHz digit to 100 Hz digit.
: RSSI A/D Value
: Current Frequency
: Squelch Status
: RSSI A/D Value (0-1023)
: Current Frequency
215
(0-1023)
(0:CLOSE / 1:OPEN)