Lenovo 3000 C200 Hardware Maintenance Manual page 78

Removing and replacing a FRU
To remove the MDC, do as follows:
When installing: Make sure that the connector is attached to the system board
To remove the PC Card slot assembly, do as follows:
When installing: Make sure that the connectors of PC Card slot assembly is
72
MT 8922
Step Screw (quantity)
1
M2.5 × 3 mm, flat-head, nylon-coated (2)
firmly, and then fasten the screws.
Step Screw (quantity)
1
M2 × 4 mm, flat-head, nylon-coated (4)
attached to the system board firmly, and then fasten the screws.
1
1
2
Color
Black
1
1
1
2
Color
Silver
Torque
0.392 Nm
(4 kgfcm)
1
Torque
0.245 Nm
(2.5 kgfcm)